Gorilla Longline Pulley Kit

Gorilla Longline Pulley Kit

from 379.95

KIT UPDATED 10/2017: The SlackTech Gorilla Longline Pulley Kit is the ideal combination of power and efficiency. This 5:1 longline pulley kit uses our strongest and most versatile components available to achieve a combined WLL of 9 kN (2,000 lbf). We use high efficiency Rock Exotica pulleys to achieve a low profile yet very functional approach to rigging.

See the Full Description below for complete hardware list.

Upgrade:
Quantity:
Add To Cart

Specifications

 

Length of Lines: 350+ ft

Webbing Width: 1 inch (25.2 mm)

Working Load Limit (WLL): 9 kN (2,000 lbf)



Full Description

 

The SlackTech Gorilla Longline Kit is the ideal combination of power and efficiency. This 5:1 longline pulley kit uses our strongest and most versatile components available to achieve a combined WLL of 9 kN (2,000 lbf). We use high efficiency Rock Exotica pulleys to achieve a low profile yet very functional approach to rigging. Rock Exotica PMP 2.0 Double pulleys are used in both the front and rear of this system. The pulley side plates are manufactured from high quality aircraft aluminum. That’s why they are more compact, stronger and lighter weight than conventional stamped pulleys.

The 130 ft of 9.5mm BW II+ Static tensioning rope is held in position with an Elderid Eddy rope brake. The Eddy is connected to the rear pulley using 3/8" Twisted Screw Pin Shackle. By using this shackle, the Eddy is rotated 90 degrees allowing the tail of the rope to come out perpendicular to the load bearing ropes in the system. A 1/2" VanBeest shackle is also included for connecting the pulley system to the spanset.

PLEASE NOTE: as of 10/2017 Image has not been updated with current combination of hardware. Description and pricing is correct. With this system, we have been able to set up a 350+ ft slackline with moderate sag with one fit person. RamLocks, anchoring material, rope or webbing is NOT included in this kit unless specified in the option descriptions!

BASE PULLEY KIT:

  • 2 - Rock Exotica 2" PMP Double Pulley
  • 1 - Elderid Eddy Rope Brake
  • 1 - 3/8" Twisted Screw Pin Shackle
  • 1 - 5/16" D Shackle
  • 1 - 1/2" VanBeest Shackle

OPTIONAL ROPE:

  • 1 - BW II+ 9.5mm Static Rope (130 ft)

Assembled in Bend, Oregon