Goliath Longline Kit

Goliath Longline Kit

from 645.95

The SlackTech Goliath Longline 1 Inch Slackline Kit is the King of power and efficiency. This 6:1 longline pulley kit uses our strongest and most versatile components available to achieve a combined WLL of 10 kN (2,250 lbf). We use high efficiency Rock Exotica pulleys to maximize every effort when setting up your longest lines.

Upgrade:
Quantity:
Add To Cart

Specifications

Length of Lines: up to 500 ft

Webbing Width: 1 inch (25.2 mm)

Working Load Limit (WLL): 10 kN (2,250 lbf)


Full Description

The SlackTech Goliath Longline Kit is the King of power and efficiency. This 6:1 longline pulley kit uses our strongest and most versatile components available to achieve a combined WLL of 10 kN (2,250 lbf). We use high efficiency Rock Exotica pulleys to maximize every effort when setting up your longest lines. A Rock Exotica PMP 2.0 Double pulley is used in front of this system with an imbedded Rock Exotica 2.0 PMP Single Pulley. The rear of this system houses a Rock Exotica 1.5" Omni-Block Double pulley and Elderid Eddy rope brake each mounted to the SlackTech Genesis Rigging Plate. This gear combination gives full clearance for all components in the system and creates the optimal package for longline rigging projects.

The 160 ft of 9.5mm BW II+ Static tensioning rope is held in position with an Elderid Eddy rope brake. The Eddy is connected to the Genesis Rigging Plate using a 7/16" Stainless Steel Bow Shackle. By using this shackle, the Eddy is positioned perfectly below the rear pulley allowing both the release handle and tail end of the rope to come strait down allwoing for easy access and a controlled release when detensioning.

The multiplier system is a necessary component in the system giving you maximum mechanical advantage from the Goliath Longline pulley kit. Comprised of high efficient ClimbTech Ascenders and a Rock Exotica Omni-Block 1.5" Swivel Pulley these components create the least amount of torque in the system when tensioning your project longline.

BASE PULLEY KIT: ($645)

  • 1 - SlackTech Genesis Rigging Plate
  • 1 - Rock Exotica 2" PMP Double Pulley
  • 1 - Rock Exotica 2" PMP Single Pulley
  • 1 - Rock Exotica 1.5" Omni-Block Double Pulley
  • 1 - 8 mm Twisted Quicklink
  • 1 - 1/2" SS D Shackle
  • 1 - 5/16" SS D Shackle
  • 1 - 1/2" Van Beest Green Pin Shackle
  • 1 - Elderid Eddy Rope Brake
  • 1 - BW II+ 9.5mm Static Rope (160 ft)

OPTIONAL ANCHOR SYSTEM: (+$329)

  • 2 - 10ft PURPLE Spansets
  • 2 - RamLocks (colors dependent on available inventory)
  • 3 - 10 mm Quicklinks
  • 1 - 60 cm Dyneema Sling
  • 1 - Tree Padding Kit

OPTIONAL MULTIPLIER SYSTEM: (+$219)

  • 1 - Rock Exotica 1.5" Omni-Block Single Pulley
  • 1 - ClimbTech Ascender
  • 1 - ClimbTech Multi-Purpose Ascender
  • 1 - Rock Exotica rockO Carabiner
  • 1 - Reset Cord

With this system, we have been able to set up a 420 ft slackline with moderate sag with one fit person (granted there is a bit of effort involved). Slackline webbing is NOT included.

Assembled in Bend Oregon