Basic Longline Kit

Basic Longline Kit

489.95

The Slackline Technology Basic Longline 1 Inch SLackline Kit is your first step towards longline rigging and hardware. We understand that getting into longlining can be a bit of a sticker shock due to all the gear required. Knowing that, we have put together this package to get you some basic gear that can be added to as your abilities grow. Every item within this kit can be used within a greater longline pulley system.

Limited quantity of Genesis Rigging plates soon to be on hand!

Quantity:
Add To Cart

Specifications

Length of Lines: up to 150 ft

Webbing Width: 1 inch (25.2 mm)

Working Load Limit (WLL): 6 kN (1,350 lbf)


Full Description

The Slackline Technology Basic Longline 1 Inch Slackline Kit is your first step towards longline rigging and hardware. We understand that getting into longlining can be a bit of a sticker shock due to all the gear required. Knowing that, we have put together this package to get you some basic gear that can be added to as your abilities grow. Every item within this kit can be used within a greater longline pulley system.

This kit uses two unique SlackTech products to give you the highest quality intro longlining kit available. This longline kit stays with the tradition of the primitive tensioning system, yet uses a combination of the SlackTech Ramlock and Genesis Rigging Pate to achieve this. This simple system separates your walking webbing from your tensioning webbing, thus increasing the life of your precious slackline webbing.

With this system, we have been able to set up low to medium stretch slackline webbing up to 150 ft with moderate sag with one fit person. Slackline webbing is NOT included in package.

KIT INCLUDES:

  • 2 - SlackTech RamLock (colors dependent on available inventory)
  • 1 - SlackTech Genesis Rigging Plate
  • 45 ft - Tensioning Webbing
  • 2 - 8 ft BLUE Spansets
  • 1 - 10 mm Quicklink
  • 1 - 1/2" Van Beest Shackle
  • 1 - Tree Padding Kit
  • 1 - 3" Steel Ring
  • 1 - Rock Exotica rockO Carabiner

Assembled in Bend, OR - USA